How To Access The Wireless Router Again Later - NETGEAR RangeMax WNR834B User Manual

Wireless Router Setup Manual

How to Access the Wireless Router Again Later

The configuration assistant wizard only appears when the router is in its factory default state, and
access to the router does not require a login name or password. After you configure the wireless
router (or bypass the configuration assistant wizard), it will not appear again, and you will have to
log in to the your wireless router to make changes to it.
Note:
The factory default state is restored when you use the factory reset button. See
the Default Configuration and Password" on page 2-6
To access the router using its login name and password, follow these instructions.
1. Connect to the wireless router by typing http://www.routerlogin.net in the address field of
your browser, then click Enter.
Figure 1-11
Tip:
Connect to the wireless router by typing any one of these three URLs in the address field
of your browser, then clicking Enter:
http://www.routerlogin.net
•
http://www.routerlogin.com
•
• http://192.168.1.1
The wireless router will prompt you to enter the user name of admin and the password.
2. For security reasons, the router has its own user name and password. When prompted, enter
admin for the router user name and
letters.
Note: The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
1-10
password for the router password, both in lower case
Connecting the Router to the Internet
v1.0, 2006-03
for more information on this feature.
"Restoring