NETGEAR RangeMax WNR834B User Manual page 11

b. Now, plug the power cord into your wireless router and into a power outlet. Wait 1 minute.
c. Last, turn on your computer.
Note: For DSL customers, if software logs you in to the Internet, do not run that
Figure 1-7
d. Check the wireless router status lights to verify the following:
• Power: The power light (1) should turn solid green. If it does not, see
page 2-1.
• Wireless: The wireless light (2) is lit after turning on the router.
• Internet: The Internet port light (3) should be lit. If not, make sure the Ethernet cable
is securely attached to the wireless router Internet port and the modem, and the
modem is powered on.
• LAN: A LAN light (4) should be lit. Green indicates your computer is communicating
at 100 Mbps; amber indicates 10 Mbps. If a LAN light is not lit, check that the
Ethernet cable from the computer to the router is securely attached at both ends, and
that the computer is turned on.
Connecting the Router to the Internet
software. You may need to go to the Internet Explorer Tools menu, Internet
Options, Connections tab page where you can select "Never dial a connection."
1
2
3
4
v1.0, 2006-03
Wireless Router Setup Manual
"Quick Tips" on
1-7