The Front Of The Wireless Router - NETGEAR RangeMax WNR834B User Manual

Wireless Router Setup Manual

The Front of the Wireless Router

1
2
3
4
Figure 1-2
You can use the status lights on the front of the wireless router to verify various conditions.
Table 1-1.
Status Light
Activity
On -- Amber
On -- Green
Fast blink -- Green
1. Power
Slow blink -- Green
Off
On -- Amber
2. Internet
On -- Green
Blink -- Green
On
3. Wireless
On (Green)
Blink (Green)
4. LAN (Local Area
On (Amber)
Network) Lights
Blink (Amber)
1-4
Off
1-2
Description
The router integrity test is running.
Power is on and the router is ready.
Software update is in progress.
There is a problem with the wireless router software.
Power is not supplied to the router.
The Ethernet cable is connected but the wireless router has
not gotten an Internet address.
The wireless router has an Internet address.
Data is being communicated with the Internet.
Indicates that the Wireless port is initialized.
The local port is connected to a 100 Mbps device.
Data is being transmitted at 100 Mbps.
The local port has detected a link with a 10 Mbps device.
Data is being transmitted at 10 Mbps.
No link is detected on this port.
Connecting the Router to the Internet
v1.0, 2006-03