The Router's Front Panel - NETGEAR RangeMax DG834N Setup Manual

Wireless ADSL2+ Modem Router Setup Manual

The Router's Front Panel

The wireless ADSL modem router front panel shown below contains status LEDs.
Figure 1-1
You can use the LEDs to verify various conditions.
Table 1-1. LED Descriptions
Label Activity
On (green)
Blink (green)
On (red)
1. Power
Off
On (green)
2. PPP
Link
Off
On (green)
Blink (green)
3. Internet
Blink -- Amber
(WAN)
Off
1-2
1
2
3
4
5
Description
Power is supplied to the router.
Firmware upgrade is in progress.
Device malfunction. Also, lights red when the reset button is pressed and
blinks red three times when the button is released.
Power is not supplied to the router.
There is an Internet session. If the session is dropped due to an idle
timeout, and an ADSL connection is still present, the light will remain
green. If the session is dropped for any other reason, the light will turn off.
The unit is off or there is no IP connection.
The ADSL port is synchronized with an ISP's network-access device.
Data is being transmitted over the ADSL port.
Indicates ADSL training.
No connection detected on the ADSL port.
v1.0, 2006-4
Table 1-1 describes each LED.
Connecting the Router to the Internet