How To Restore An Alarm - Honeywell Galaxy 2 Series Installation Manual

Galaxy 2 Series Installation Manual
Quick Guide (cont'd)

How to Restore an Alarm

Alarms, faults and tampers will be restored provided:
1. The cause has cleared
2. An authorised user PIN code or anti-code has been entered.
3. The conditions have been viewed on the keypad display after steps 1 and 2 above.
If a user cannot restore all the conditions, a temporary banner is displayed to indicate that a manager or
engineer is required to restore the system. This lasts for 30 seconds before the normal banner is displayed.
4