Table of Contents
Advertisement
The data is output as:
34567890
<CR>
FC—Stop suppressing characters
Disables suppress filter and clear all suppressed characters. Syntax = FC.
E4—Replace characters
Replaces up to 15 characters in the output message, without moving the cursor.
Replacement continues until the E5 command is encountered. Syntax = E4nnxx-
xx
1
list (characters to be replaced plus replacement characters); xx
to be replaced and xx
and zz
E4 Example: Replace zeroes with CRs in bar code data
If the bar code has characters that the host application does not want included,
you can use the E4 command to replace those characters with something else. In
this example, you will replace the zeroes in the bar code above with carriage
returns.
Command string: E402300DF10D
E4
02
30
0D
F1
0D
The data is output as:
1234
5678
ABC
<CR>
E5—Stop replacing characters
Terminates character replacement. Syntax = E5.
72
yy
yy
...zz
zz
where nn is the total count of the number of characters in the
2
1
2
1
2
2
.
2
"Replace characters" command
Total count of characters to be replaced, plus the replacement characters (0 is replaced by
CR, so total characters = 2)
Hex value for 0
Hex value for a CR (the character that will replace the 0)
"Send all characters" command
Hex value for a CR
defines replacement characters, continuing through zz
HF52X Fix Mount Barcode Scanner User Guide
defines characters
1
1
Advertisement
Table of Contents
