Table of Contents
Advertisement
44
0D
The data is output as:
1234567890ABC
<CR>
B9—Send all characters up to a string
Include in the output message all characters from the input message, starting with
the character at the current cursor position and continuing to, but not including,
the search string "s...s." The cursor is moved forward to the beginning of the "s...s"
string. Syntax = B9nnnns...s where nnnn stands for the length of the string, and s...s
stands for the string to be matched. The string is made up of hex values for the
characters in the string. Refer to the
beginning on page 212 for decimal, hex and character codes.
B9 Example: Send all characters up to a defined string
Using the bar code above, send all characters up to but not including "AB."
Command string: B900024142
B9
0002
41
42
The data is output as: 1234567890
E9—Send all but the last characters
Include in the output message all but the last "nn" characters, starting from the
current cursor position. The cursor is moved forward to one position past the last
input message character included. Syntax = E9nn where nn stands for the numeric
value (00-99) for the number of characters that will not be sent at the end of the
message.
F4—Insert a character multiple times
Send "xx" character "nn" times in the output message, leaving the cursor in the cur-
rent position. Syntax = F4xxnn where xx stands for the insert character's hex value
for its ASCII code, and nn is the numeric value (00-99) for the number of times it
should be sent. Refer to the
on page 212 for decimal, hex and character codes.
64
Hex value for a 'D"
Hex value for a CR
"Send all characters up to a string" command
Length of the string (2 characters)
Hex value for A
Hex value for B
ASCII Conversion Chart (Code Page 1252),
ASCII Conversion Chart (Code Page 1252),
HF52X Fix Mount Barcode Scanner User Guide
beginning
Advertisement
Table of Contents
