Table of Contents
Advertisement
Data Format Editor Commands
When working with the Data Format Editor, a virtual cursor is moved along your
input data string. The following commands are used to both move this cursor to
different positions, and to select, replace, and insert data into the final output.
Send Commands
F1—Send All Characters
Include in the output message all of the characters from the input message, start-
ing from current cursor position, followed by an insert character. Syntax = F1xx
where xx stands for the insert character's hex value for its ASCII code. Refer to the
ASCII Conversion Chart (Code Page 1252),
and character codes.
F2—Send a number of characters
Include in the output message a number of characters followed by an insert char-
acter. Start from the current cursor position and continue for "nn" characters or
through the last character in the input message, followed by character "xx." Syntax
= F2nnxx where nn stands for the numeric value (00-99) for the number of charac-
ters, and xx stands for the insert character's hex value for its ASCII code. Refer to
the
hex and character codes.
Example: Send a number of characters
62
Terminal ID Table
Terminal
USB
Serial
Keyboard
ASCII Conversion Chart (Code Page 1252),
Model(s)
PC keyboard (HID)
Mac Keyboard
PC Keyboard (Japanese)
Serial (COM driver required)
HID POS
USB SurePOS Handheld
USB SurePOS Tabletop
RS232 TTL
RS232 True
PS2 compatibles
AT compatibles
beginning on page 212 for decimal, hex
beginning on page 212 for decimal,
HF52X Fix Mount Barcode Scanner User Guide
Terminal ID
124
125
134
130
131
128
129
000
000
003
002
Advertisement
Table of Contents
