F3-Send All Characters Up To A Particular Character - Honeywell HF52X User Manual

Send the first 10 characters from the bar code above, followed by a carriage return.
Command string: F2100D
F2
10
0D
The data is output as: 1234567890
Example: Split characters into 2 lines
Send the first 10 characters from the bar code above, followed by a carriage return,
followed by the rest of the characters.
Command string: F2100DF10D
F2
10
0D
F1
0D
The data is output as:
1234567890
ABCDEFGHIJ
<CR>
F3—Send all characters up to a particular character
Include in the output message all characters from the input message, starting with
the character at the current cursor position and continuing to, but not including,
the search character "ss," followed by an insert character. The cursor is moved for-
ward to the "ss" character. Syntax = F3ssxx where ss stands for the search charac-
ter's hex value for its ASCII code, and xx stands for the insert character's hex value
for its ASCII code.
Refer to the
decimal, hex and character codes.
Example: Send all characters up to a particular character
Using the bar code above, send all characters up to but not including "D," followed
by a carriage return.
Command string: F3440D
F3
HF52X Fix Mount Barcode Scanner User Guide
"Send a number of characters" command
Number of characters to send
Hex value for a CR
"Send a number of characters" command
Number of characters to send for the first line
Hex value for a CR
"Send all characters" command
Hex value for a CR
ASCII Conversion Chart (Code Page 1252),
"Send all characters up to a particular character" command
beginning on page 212 for
63