Advertisement
Slide the battery holder complete upward to take away it.
Remove the battery from deck and then replace it.
<Cautions in assembling>
Be sure to place the temperature fuse complete between
batteries.
4.How to remove the motor assembly
Motor assembly
Sponge sheet B
Slide away
Hexagon lock nut M6-10(4 pieces)
Fix plate(2 pieces)
Hexagon bolt M6x40(4 pieces)
Slide the battery holder complete until
the sponge sheet B touches with the
temperature fuse complete.
Remove.
Engage the box wrench 10 with both
hexagon lock nut M6-10 and hexagon
bolt M6x40, and then disassemble the
hexagon bolt M6x40 and the fix plate.
<Cautions in assembling>
Fasten the hexagon bolt M6x40 under
the tool setting torque of 40-60 kgf-
cm[2.9-4.3 ft-lbs] when assembling.
Advertisement
