Advertisement
<Cautions in assembling>
Set the torsion spring 20 on the lever as shown on the figure.
Boss
Tension spring 5
Switch lever arm
Cross boss
Switch box cover
Insert the boss(2 pieces) of the switch box equipped with the lever and switch button through the hole on the
handle to assemble.
Set the compression spring 16 on the cross boss of the switch box cover, and then mount the switch box cover on
the switch box.
Switch box
Lever
Compression spring 16
Lever
Cover the switch
box cover.
Torsion spring 20
Lever
Handle
Switch box
Insert the U-shaped hook of the
tension spring 5 through the hole of
lever. Also set the circle-shaped hook
on the boss of the switch box.
Mount the lever on the switch lever
arm which has been pre-mounted on
the switch box.
Set the thin washer 15 and E ring
12 to fix.
Switch button
Insert the boss through the hole on the handle.
Advertisement
