Installing The Ball-Shaped Sensor Unit; Mounting With The Included Bracket - HIKVISION DeepinView DS-2XM6425G0/F Series Quick Start Manual

Network Covert Camera·Quick Start Guide

Installing the Ball-Shaped Sensor Unit

2.5

2.5.1 Mounting with the Included Bracket

Steps:
1. Paste the drill template to the desired mounting place. Drill two
screw holes and a hole for routing cable according to the drill
template.
2. Route the camera cable through the mounting base of the
included bracket. Fixed the mounting base to the wall or ceiling.
Figure 2-33 Drill Template
50