Table of Contents
Advertisement
Network Covert Camera·Quick Start Guide
Installing the Block-Shaped Sensor Unit
2.2
This series of camera support concealed mounting and exposed
mounting with a decorative cover.
2.2.1 Concealed Mounting
Please make sure that the mounting surface is suitable for adhesive
pasting.
Steps:
1. Drill on the mounting surface, as shown in Figure 2-8.
Drill on the Surface
Make sure the drilling hole is big enough for the camera lens.
2. Remove a side of the adhesive tape on the bracket. Paste the
bracket on mounting surface by aligning with the drilled hole.
32
Advertisement
Table of Contents
