Operation - Makita XML12 Instruction Manual

Using mulching plug
The mulching plug allows you to return the cut grass to
the ground without gathering the cut grass in the grass
basket. When you operate the machine with the mulch-
ing plug, be sure to remove the grass basket.
NOTICE:
When using the machine with the
mulching plug, make sure that the total length of
grass after cutting is 30 mm (1-3/16") or more, and
the cut length is 15 mm (9/16") or less.
Fig.21
► (1) 30 mm (1-3/16") or more (2) 15 mm (9/16") or
less

OPERATION

Mowing
WARNING:
Before mowing, clear away sticks
and stones from mowing area. Furthermore, clear
away any weeds from mowing area in advance.
WARNING:
Always wear the safety goggles or
safety glasses with side shields when operating
the mower.
CAUTION:
If the cut grass or foreign object
blocks up inside of the mower body, be sure to remove
the lock key and battery pack and wear gloves before
removing the grass or foreign object.
NOTICE:
Use this machine for mowing lawn only.
Do not mow weeds with this machine.
Fig.22
Firmly hold the handle with both hands when mowing.
The mowing speed guideline is approximately 2 to 4
seconds per 1 meter (3.3 ft.).
2
Fig.23
1
The center lines of the front wheels are guidelines to
mowing width. Using the center lines as guidelines,
mow in strips. Overlap by one half to one third the previ-
ous strip to mow the lawn evenly.
Fig.24
► 1. Mowing width 2. Overlapping area 3. Center line
Change the mowing direction each time to prevent the
grass grain pattern from forming in just one direction.
Fig.25
Periodically check the grass basket for mowed grass.
Empty the grass before it becomes full. Before every
periodical check, be sure to stop the mower then
remove the lock key and the battery pack.
NOTICE:
full prevents smooth blade rotation and places
an extra load on the motor, which may cause
breakdown.
12 ENGLISH
1
Using the mower with the grass basket
2 3