Baby Monitor; Call Tone Settings; "Roger Beep" Confirmation Tone - Cobra microTALK MT 750 Owner's Manual

MODE FUNCTIONS
OPERATION

Baby Monitor

With the Baby Monitor Function on, a radio left
near a baby will transmit to another unit on the
same channel and privacy code whenever a sound
is detected. Baby Monitor uses the same
sensitivity level you set for the VOX Function. If
you have not set a VOX sensitivity level (see the
"Voice Activated Transmit [VOX]" section of this
manual), the maximum sensitivity level 5 will
automatically be used.
To Turn Baby Monitor On:
1. Press MODE button until the
Baby Monitor icon flashes
on the display. The current
Off setting is displayed.
2. Press the CHANNEL UP or
CHANNEL DOWN button to
change the setting to On.
3. Press the LOCK button to
enter the On setting and
enter BABY MONITOR MODE.
NOTES: Pressing the MODE
button will enter the
Baby Monitor Mode
setting as Off and
proceed to other
Mode Functions.
Not pressing any buttons for fifteen (15)
seconds will enter the Baby Monitor Mode
setting as Off and return the radio to
LISTENING MODE.
NOTE: Both radios must be tuned to the same
channel and privacy code to communicate.
To Terminate Baby Monitor Mode:
Choose one of the following:
a. Press the TALK button and return to
LISTENING MODE.
b. Press the LOCK button and return to
LISTENING MODE.
c. Press the MODE button and proceed to
the next available Mode Function.

5 Call Tone Settings

You can choose between five (5) different call
tone settings to transmit a unique call alert.
To Change a Call Tone
Setting:
1. Press the MODE button
until the letter "C" and the
current call tone number
(1 to 5) is displayed. The
current call tone will sound
for two (2) seconds.
2. Press the CHANNEL UP
or CHANNEL DOWN button
to hear the other call
tone settings.
3. When your desired call tone setting is
displayed, choose one of the following:
a. Press the MODE button to enter the new
b. Press the LOCK button to enter the new
c. Do not press any buttons for fifteen (15)

"Roger Beep" Confirmation Tone

Mode Button
Your listener will hear an audible tone when
you release the TALK button. This alerts the other
party that you have finished talking and that it is
OK for them to speak. This feature can be turned
On or Off.
Select Baby Monitor
To Turn "Roger Beep" On or Off:
When you turn On your microTALK
first time, "Roger Beep" will be On.
1. Press and release the MODE
Channel Buttons
button until the "Roger
Beep" icon flashes on the
display. The current On or
Off setting is displayed.
Lock Button
2. Press the CHANNEL UP or
CHANNEL DOWN button
to select "Roger Beep"
On or Off.
3. When your desired Roger
Beep Mode setting is
displayed, choose one
of the following:
a. Press the MODE button
b. Press the LOCK button to enter the new
c. Do not press any buttons for fifteen (15)
The setting you select will be saved when you
turn your radio off and on again. When the
"Roger Beep" is On, the "Roger Beep" icon
will be displayed.
Mode Button
Call Tone Setting
Channel Buttons
setting and proceed
to other functions.
setting and return to LISTENING MODE.
seconds to enter the new setting and
return to LISTENING MODE.
to enter the new setting and proceed
to other functions.
setting and return to LISTENING MODE.
seconds to enter the new setting and return
to LISTENING MODE.
English
® radio for the
Mode Button
Select Roger Beep
Channel Buttons