Dual Watch - Cobra microTALK MT 750 Owner's Manual

MODE FUNCTIONS
OPERATION
The Scan icon will continue to be displayed when
CTCSS privacy code scan is On. Your radio will
continue to scan CTCSS privacy codes and stop as
an incoming transmission is detected. Your radio
will remain on that channel/privacy code for ten
(10) seconds.
While setting CTCSS privacy code scan, if you do
not press any buttons for fifteen (15) seconds
your radio will automatically return to LISTENING
MODE on the channel/privacy code that was
displayed before you entered Mode Functions.
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the TALK button to
communicate on that channel/privacy code.
Your radio will remain on that
channel/privacy code and return
to LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN
button to resume scanning CTCSS privacy
codes.
If you press the TALK button while scanning
and not within ten (10) seconds of receiving
a transmission, you will transmit on the
channel/privacy code on which you last received
a transmission. This will return the radio to
LISTENING MODE.
If you do not press any button within ten (10)
seconds, your radio will automatically resume
scanning CTCSS privacy codes.
During Scanning (while not receiving
a transmission), You Can Choose From
The Following:
a. Press and hold the TALK button to
communicate on either the channel
or channel/privacy code that was
displayed before you entered Mode
Functions or channel/privacy code
on which, during scanning, you last
received a transmission. This will return
the radio to LISTENING MODE.
b. Press the MODE button to proceed to next
available Mode Function.
c. Press the LOCK button to return to
LISTENING MODE on either the channel or
channel/privacy code that was displayed
before you entered Mode Functions or the
channel/privacy code on which, during
scanning, you last received a transmission.

Dual Watch

Dual Watch allows you to simultaneously monitor
any two (2) Dual Watch Locations:
Dual Watch Location 1 – is always the
channel/privacy code displayed before
you entered Mode Functions. See
"Channels" and "CTCSS Privacy Codes"
sections for further details.
Dual Watch Location 2 – will be stored in the
radio. It can be edited and/or recalled for
future engagements of Dual Watch Mode.
To Program Or Edit Dual Watch
Location 2 And Engage Dual Watch
Mode:
1. Press the MODE button
until the Dual Watch icon
and the channel number
flash on the display.
2. Choose one of the
following:
a. Select or edit a channel:
1) Press the CHANNEL
UP or CHANNEL
DOWN button to
select a channel
(1 to 8).
b. Select or edit a channel/privacy code:
1) Press the CHANNEL UP or CHANNEL
DOWN button to select a channel
(1 to 8).
2) Press the MODE button to set the
channel. The small numbers next to the
channel number will flash on the display.
3) Press the CHANNEL UP or CHANNEL
DOWN button to select a CTCSS privacy
code (00 to 38).
3. Press the LOCK button to
set Dual Watch Location 2
and engage DUAL WATCH
MODE (see below for
further details).
NOTES: To terminate Dual Watch and proceed
to the next available Mode Function,
press the MODE button.
While setting Dual Watch Location 2,
if you do not press any buttons for fifteen
(15) seconds your radio will automatically
return to LISTENING MODE on Dual Watch
Location 1.
English
Mode Button
Select Dual Watch
Channel Buttons
Lock Button