Advertisement
TECHNICAL DATA
Rated voltage
No-load speed
Saw blade dia. x hole dia
Cutting depth at 0°
Cutting depth at 45°
Cutting depth at 45°
Blade thickness
Blade teeth
Weight - not including battery pack
Measured values determined according to EN 62841:
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841:
Vibration emission value
Uncertainty K
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level
represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
BATTERY AND CHARGER
Compatible battery pack
(not included)
L1815R
L1820R
L1825R
L1830R
L1830R-X5
L1840R
L1850R
L1860R
L1860R-X5
L1890R
L1820S
Use AEG 18V battery and charger only
WARNING!
WARNING! Read all safety warnings, instructions, illustrations
and specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire and/
or serious injury. Save all warnings and instructions for future
reference.
CIRCULAR SAW SAFETY WARNINGS
CUTTING PROCEDURES
Danger: Keep hands away from cutting area and the blade.
Keep your second hand on auxiliary handle, or motor housing. If
20
Compatible charger
(not included)
AL18G
AL1218G
BL1218
BLK1218
BL18DP-X5
BL18DP2-X5
BL18DPS
20
CIRCULAR SAW
both hands are holding the saw, they cannot be cut by the blade.
Do not reach underneath the workpiece. The guard cannot protect
you from the blade below the workpiece.
Adjust the cutting depth to the thickness of the workpiece.
Less than a full tooth of the blade teeth should be visible below the
workpiece.
Never hold the workpiece in your hands or across your leg while
cutting. Secure the workpiece to a stable platform. It is important
to support the work properly to minimize body exposure, blade
binding, or loss of control.
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting tool may contact
hidden wiring. Contact with a "live" wire will also make exposed metal
parts of the power tool "live" and could give the operator an electric
shock.
When ripping, always use a rip fence or straight edge guide.
This improves the accuracy of cut and reduces the chance of blade
binding.
Always use blades with correct size and shape (diamond versus
round) of arbour holes. Blades that do not match the mounting
hardware of the saw will run eccentrically, causing loss of control.
Never use damaged or incorrect blade washers or bolt. The blade
washers and bolt were specially designed for your saw, for optimum
performance and safety of operation.
KICKBACK CAUSES AND RELATED WARNINGS
– kickback is a sudden reaction to a pinched, jammed or
misaligned saw blade, causing an uncontrolled saw to lift up
and out of the workpiece toward the operator;
– when the blade is pinched or jammed tightly by the kerf
A18CS57
18 V
3700 min
-1
165 x 20 mm
57 mm
39.7 mm
36.7 mm
1.6 mm
18
3.0 kg
L
= 88.5 dB(A)
A
p
3 dB(A)
L
= 99.5 dB(A)
WA
3 dB(A)
a
= 1.7 m/s
2
h
1.5 m/s
2
Advertisement
