Table of Contents
Advertisement
2.4 Specifications
The following list the electrical specifications for the DACT-E3 sub-assembly.
Operating Voltage:
Operating Current:
Alarm Current:
Operating Temperature:
Relative Humidity:
Supervised
Class 2 Power-Limited
Section 3: Wiring Connections
Table 3.1 lists the field wiring connections for the DACT-E3.
Designation
TB1-1
COM A IN
TB1-2
COM B IN
TB1-3
COM A OUT
TB1-4
COM B OUT
TB1-5
+24 V IN
TB1-6
GND
TB2-1
T1 Tip
TB2-2
T1 Ring
TB2-3
P1 Tip
TB2-4
P1 Ring
TB2-5
T2 Tip
TB2-6
T2 Ring
TB2-7
P2 Tip
TB2-8
P2 Ring
*Non power-limited
NOTE: For additional information on the DACT-E3, refer to the following document:
®
- E3 Series
(Expandable Emergency Evacuation System) Control Panel UL Listing Document, P/N: LS10080-051GF-E
6
24 VDC non-resettable
0.018 amp
0.018 amp
32° to 120° F (0° to 49° C)
0 to 93%, non-condensing at 90° F (32° C)
Description
COM A from ILI-MB-E3/ILI95-MB-E3 TB3-1 or SLP-E3 TB3-1
COM B from ILI-MB-E3/ILI95-MB-E3 TB3-2 or SLP-E3 TB3-2
COM A OUT to other devices
COM B OUT to other devices
+ 24 VDC from PM-9/PM-9G TB4-1, TB4-3, TB4-5 or SLP-E3 TB2-3
GND from PM-9/PM-9G TB4-2, TB4-4, TB4-6 or SLP-E3 TB2-4
Line 1 Tip IN from street Non power-limited*
Line 1 Ring IN from street Non power-limited*
Line 1 Tip OUT to phone Non power-limited*
Line 1 Ring OUT to phone Non power-limited*
Line 2 Tip IN from street Non power-limited*
Line 2 Ring IN from street Non power-limited*
Line 2 Tip OUT to phone Non power-limited*
Line 2 Ring OUT to phone Non power-limited*
Table 3.1 DACT-E3 Installation Wiring Terminals
DACT-E3 Product Installation Document — P/N 9000-0581:J6 12/16/2019
Comments
Advertisement
Table of Contents
