Telephone Requirements - Honeywell DACT-E3 Product Installation Document

Code Event
927 DACT Report Time out
928 DACT Account 2 Fault
929 DACT Line 1 Fault
930 DACT Line 2 Fault
931 INI Communication Fault
932 INI Node Number Fault
933 Net Port 1
934 Net Port 2
935 Fan Restart
936 User 1
937 User 2
938 User 3
939 User 4
940 User 5
941 Node 0
942 Reserved
943 Releasing Zone 1
944 Releasing Zone 2
945 Releasing Zone 3
946 Releasing Zone 4
947 Releasing Zone 5
948 Releasing Zone 6
949 Releasing Zone 7
950 Releasing Zone 8
951 - 981 Cross Zone 1 - 31
982 Node Missing
983 Node Extra
984 LCD Display Fault
985 Any ASM-16 or ANU-48
986 Any non-SLC Event
987-990 Reserved
991 Test with exception
992 - 999 Reserved
Table 4.3.1 Non-SLC Device Events Reporting Codes (Continued)

4.4 Telephone Requirements

• DC Ringer Equivalence Number (REN) = 0.5B •
The REN is used to determine the quantity of devices that may be connected to the telephone line. Excessive RENs on the telephone
line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not
exceed five. To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the
Telephone Company to determine the maximum REN for the calling area.
NOTE: Communication Line Test Requirement:
To comply with UL 864 10th Edition, the System self-tests the communication line between the communicator and the
receiver, 4-24 DACT Test Time Settings per day.
DACT-E3 Product Installation Document — P/N 9000-0581:J6 12/16/2019
Issued if node address DIP switches do not match the node number in the node's
configuration.
Cross Zone 31 (981) is used to report Group Cross Zone Events.
Any Node Missing Trouble, does not indicate a specific node
Any Node Extra Trouble does not indicate a specific node
Any LCD Display Fault (LCD-E3, LCD-7100 or LCD-SLP) (does not indicate a specific
display
Does not indicate a specific ASM-16 or ANU-48
Any non-SLC Event that is not otherwise listed in the Table.
Automatic DACT test OK, but Trouble, or Off-Normal condition present in the system.
AC Ringer Equivalence Number = 1.3 •
Comments
Complies with FCC Part 8
13