Honeywell SYA14 Series Manual page 619

IMPROPER CONNECTION OF LOAD
For safety reasons, the loads must be connected between terminals 2-8 and between
terminals 2-25 .
Failure to comply with these instructions could result in death or serious injury.
MANUAL RESTART
•
The restart contact can be provided by the press cycle start command.
•
The effective restart of the module is achieved 30 ms after the push-button is
released, and after a short pulse (between 0.1s and 1s) is sent on the appropriate input
of the module.
107004-15 EN FR26 ROW 0899 Printed in France 85