Connect - Linksys WPC100 User Manual

Chapter3
Sgnal Strength The Signal Strength bar indicates the
signal strength.
Lnk Qualty The Link Quality bar indicates the quality of
the wireless network connection.
Click Statstcs to go to the Wireless Network Statistics
screen. Click Back to return to the initial Link Information
screen. Click Save to Profle to save the currently active
connection settings to a profile.
Wireless Network Statistics
The Wireless Networks Statistics screen provides statistics
on your current network settings.
Wireless Network Statistics
Transmt Rate This is the data transmission rate of
the current connection. (In Auto mode, the Adapter
dynamically shifts to the fastest data transmission rate at
any given time.)
Receve Rate This is the rate that the Adapter receives
data.
Packets Receved This shows the packets that the
Adapter receives, in real time, after connecting to the
wireless network or after clicking the Refresh button.
Packets Transmtted
This shows the packets that the
Adapter transmits, in real time, after connecting to the
wireless network or after clicking the Refresh button.
Bytes Receved This shows the bytes that the Adapter
receives, in real time, after connecting to the wireless
network or after clicking the Refresh button.
Bytes Transmtted This shows the bytes that the Adapter
transmits, in real time, after connecting to the wireless
network or after clicking the Refresh button.
Drver Verson This shows the Adapter's driver version.
Nose Level
This shows the level of background noise
that affects the wireless signal. A lower reading translates
into a higher quality signal.
RangePlus Wreless Notebook Adapter
Sgnal Strength This is the intensity of the wireless signal
that the Adapter receives.
Transmt Power This is the power output at which the
Adapter transmits.
Up Tme
This indicates the length of the most recent
connection to a wireless network.
Total Up Tme This indicates the cumulative total of the
Adapter's connection time.
Sgnal Strength The Signal Strength bar indicates the
signal strength.
Lnk Qualty The Link Quality bar indicates the quality of
the wireless network connection.
Click Back to return to the initial Link Information
screen. Click Status to go to the Wireless Network Status
screen. Click Save to Profle to save the currently active
connection settings to a profile. Click Refresh to reset the
statistics.

Connect

The Connect screen displays a list of available networks
in the table on the left. The table shows each network's
wireless network name, channel, and the quality of
the wireless signal the Adapter receives. You may click
Wireless Network Name, CH (Channel), or Signal, to sort
by that field.
Connect
Wreless Network Name This is the SSID or unique name
of the wireless network.
CH This is the channel that the network uses.
Sgnal This is the percentage of signal strength, from 0
to 100%.
Site Information
For each network selected, the following settings are
listed:
Configuration
4