Table of Contents
Advertisement
Chapter3
To connect to the network, click Connect. To cancel the
connection, click Cancel.
Profiles
The Profiles screen lets you save different configuration
profiles for different network setups. The table on the left
displays a list of available profiles with their profile names
and wireless network names.
Profiles
Profle
This is the name of the profile.
Wreless Network Name
This is the SSID or unique name
of the wireless network.
Profile Information
For each profile selected, the following are listed:
Wreless Mode
This is the mode of the wireless network
currently in use.
Wde Channel
If the network is Wireless-N, the primary
Wireless-N channel will be displayed.
Standard Channel
This displays the channel used by
your wireless network.
Securty
This is the status of the wireless security.
Authentcaton
This is the authentication setting for the
network.
Connect
To connect to a wireless network using a specific
profile, select the profile, and click Connect.
New
Click New to create a new profile. See the next
section, "Create a New Profile, " for instructions.
Edt
Select the profile you want to change and click Edt.
Import
Click Import to import a profile that is saved in
another location. Select the appropriate file, and click
Open.
RangePlus Wreless Notebook Adapter
Export
Select the profile you want to save in a different
location, and click Export. Direct Windows to the
appropriate folder, and click Save.
Delete
Select the profile you want to delete and click
Delete.
NOTE:
If you want to export more than one
profile, you must export them one at a time.
Create a New Profile
The next screen is the Available Wireless Networks screen.
Available Wireless Networks
This screen provides two options for setting up the
Adapter.
Avalable Wreless Networks
option if you already have a network set up. The networks
available to this Adapter are listed on this screen. You
can choose one of these networks and click Connect
to connect to it. Click Refresh to update the Available
Wireless Networks list.
Advanced Setup
If your network is not listed on this
screen, select Advanced Setup to set up the Adapter
manually. This method of setting up the Adapter is
intended for advanced users only.
The setup for each option is described, step by step, under
the appropriate heading on the following pages.
Click Back to close the Setup Wizard and set up the
Adapter later.
Available Wireless Networks
The available networks are listed in the table on the
center of the screen by Wireless Network Name. Select
the wireless network you wish to connect to and click
Connect. (If you do not see your network listed, you can
click Refresh to bring the list up again.) If the network
utilizes wireless security, you will need to configure
Configuration
(For most users) Use this
6
Advertisement
Table of Contents
