Linksys WUSB300N Quick Installation

Package Contents
• Wireless-N USB Network Adapter
• USB Extension Cable
• USB Extension Base
• Setup CD-ROM with User Guide
• Quick Installation
24 .
GHz
Wireless-N
USB Network Adapter
Wireless Quick Installation
Model No. WUSB300N
Model No.
1
Begin Installation
IMPORTANT: Do not install the Adapter in your PC until
you are instructed to do so in Step 2 or the Adapter will
not install correctly.
A
The Network Adapter is
installed and set up using
the Setup Wizard that
comes on the enclosed
CD.
B
To begin, insert the Setup
Wizard CD-ROM into your
CD-ROM drive. The Setup
Wizard should run automati-
cally, and the Welcome
screen should appear.
C
C
To install the Adapter, click
Click Here to Start on the
Welcome screen.
D
After reading the License
Agreement, click Next to
continue the installation
and Windows will begin
copying the files onto your
PC.
E
Windows will begin copying
D
the files onto your PC.
F
The Setup Wizard will now
prompt you to install the
Adapter into your PC.
Proceed to Step 2.
2

Connect the Adapter

Go to the section for your
Windows operating system.
Windows XP
A
When the Software Installa-
tion screen appears, click
Continue Anyway.
B
Locate an available USB
port on your PC.
C
A
Connect the Adapter in
one of three ways:
1 Insert the Adapter into
the USB port.
2 If you want to use the
included USB Extension
Base, first connect the
USB Extension Base to
the USB port on the PC,
then insert the Adapter
into the USB port on the
Base. Connecting
3 If you want to use the
the Adapter
included USB Extension
Cable, connect the
Adapter to the female
end of the USB Extension
Cable, then connect
the male end of the
Cable to the PC.
Then, click Next.
D
If you have Windows XP with
Service Pack 2, the Wel-
come to the Found New D
Hardware Wizard screen
appears, click Next.
E
When the Found New Hard-
ware screen appears,
make sure that Install the
Software Automatically
(Recommended) is
selected, then click Next.
E
F
When this screen appears,
click Continue Anyway.
G
Windows will begin copying
the driver files to your com-
puter.
F
H
When the Wizard has fin-
ished installing the soft-
ware, click Finish.
Proceed to Step 3.
H