Package Contents
• Wireless-G Notebook Adapter
• Setup Wizard CD-ROM
• User Guide on CD-ROM
• Quick Installation
24 .
GHz
Wireless-N
Notebook Adapter
Wireless
Quick Installation
Model No.
WPC300N
Model No.
1
Begin Installation
IMPORTANT: Do not install the Adapter in your PC until
you are instructed to do so in Step 2 or the Adapter will
not install correctly.
A
The Notebook Adapter is
installed and set up using
the Setup Wizard that
comes on the enclosed
CD.
B
To begin, insert the Setup
Wizard CD-ROM into your
CD-ROM drive. The Setup
Wizard should run automati-
cally, and the Welcome
screen should appear.
C
C
To install the Adapter, click
Click Here to Start on the
Welcome screen.
D
After reading the License
Agreement, click Next to
continue the installation
and Windows will begin
copying the files onto your
PC.
E
Windows will begin copying
D
the files onto your PC.
F
The Setup Wizard will now
prompt you to install the
Adapter into your PC.
Proceed to Step 2.
2
Connect the Adapter
Go to the section for your Win-
dows operating system.
Windows XP
A
When the Software Installa-
tion screen appears, click
Continue Anyway.
B
Locate an available Card-
Bus slot on your notebook
PC.
A
C
With the connector pin end
facing the CardBus slot and
the label facing up, slide
the Adapter into the Card-
Bus slot until it locks in place.
Then, click Next.
Connecting
the Adapter
D
If you have Windows XP with
Service Pack 2, the Wel-
come to the Found New
Hardware Wizard screen
appears, click Next.
D
E
When the Found New Hard-
ware screen appears, make
sure that Install the Software
Automatically (Recom-
mended) is selected, then
click Next.
E
F
When this screen appears,
click Continue Anyway.
G
Windows will begin copying
the driver files to your com-
puter.
F
H
When the Wizard has fin-
ished installing the software,
click Finish.
Proceed to Step 3.
H