Bosch BCC100 Quick Start Manual
Hide thumbs
Also See for BCC100:
- Installation manual and user's manual (53 pages) ,
- User manual (36 pages) ,
- Settings manual (28 pages)
Related Manuals for Bosch BCC100
Summary of Contents for Bosch BCC100
- Page 1 Bosch Connected Control Bosch Connected Control BCC100 Thermostat Quick Start Guide BCC 100 Thermostat Quick Start Guide boschheatingandcooling.com...
- Page 2 Quick Start Guide For 24V-AC Thermostat Wiring Warning: Failure to follow and read all instructions before installing or operating this device may cause personal injury and/ or property damage. IN THE BOX ▶ BCC-100 Wi-Fi Thermostat ▶ Two screws and anchors Some features require ▶...
-
Page 3: Getting Started
Getting Started Bosch BCC-100 thermostat is designed to work on most 24Vac low voltage heating and cooling systems such as gas and oil furnaces, heat pumps, and single or dual-stage systems. Professional installation recommended for: ▶ Separate humidifiers and dehumidifiers Turn Power Off Please turn off the unit’s main power at the circuit panel... - Page 4 1st Stage Heating Power Cooling Emergency heat activated at W1 2nd Stage Heating Power Heating Auxiliary heat activated at W2 Common Reverse Valve H/Dh (De) Humidifier 1st Stage Cooling Data (Only to be used with Bosch WSHP) 2nd Stage Cooling Jump Wire...
- Page 5 The following are wiring diagrams for common systems: Conventional Heating Thermostat (2 Stages) / Cooling System Data (2 Stages) with humidifier Install a jumper between R/h and Rc only if a single transformer is used for H/Dh heating and cooling. Otherwise connect the heating transformer to R/h and/or the cooling...
- Page 6 Thermostat Heat Pump 4 Heat/ 2 Cool Data with Dehumidifier ▶ Connect Rc to R/h H/Dh Heat Pump 3 Heat / 2 Cool Thermostat Data ▶ Connect Rc to R/h ▶ Connect W to W2 to operate both stages of electric heat at the same time H/Dh...
- Page 7 Attach Bosch BCC-100 to the Wall First align the two clips on the back of the Bosch BCC-100 into the corresponding slots on the top of the wall plate. Firmly press forward until you hear a click to secure the thermostat into position.
-
Page 8: Main Screen
Your thermostat should power on and prompt you to start the setup. If you are having trouble powering the thermostat, please refer to boschheatingandcooling.com for additional support. Thank you for choosing the BCC100. Enjoy the savings and comfort of owning a Bosch connected thermostat! Main Screen Main Menu... - Page 9 Initialization For a quick and easy way to begin using your new smart thermostat, the device will automatically direct you to the Initial Setup screen once it’s turned on for the first time. 1. Heating Type Select your home’s heating Heat Pump System? type from the options Configure the...
- Page 10 2. Date, Time ON DEVICE: Please enter your location’s current date and time; once the device is registered or linked to a user account, the date and time on the device will automatically update to the current time associated with the user account.
- Page 11 4. Schedule Only 2 schedules (Home & Vacation) will be available during offline operation. However, this list can be expanded to up to 99 schedules when Wi-Fi connection is established. HOME: This schedule will be utilized to set your heating and/or cooling equipment to predefined set points.
- Page 12 5. Review In the final step, you will be requested to review all information that has been entered into the thermostat. You will be able to go back to different parts of the “Initial Setup” guide by pressing the different sections on the left.
- Page 13 Wi-Fi Setup Wi-Fi Connection SCAN | Tap the Wi-Fi icon to enter the Wi-Fi setup screen, then tap the Scan icon to list available Wi-Fi networks. Follow on-screen instructions to complete the Wi-Fi setup. Hidden Wi-Fi Connection MANUAL ENTRY | If you are trying to connect to a hidden network, press “SSID”...
- Page 14 The following may cause a failed connection to the device: ▶ Wi-Fi signal is too weak ▶ 5G Wi-Fi network is too weak ▶ SSID contains space or non-ASCII characters ▶ Double check your password and try again ▶ Wi-Fi is okay but your internet is unavailable ▶...
- Page 15 Auto Reconnect If your device loses connection with your wireless network, it will automatically attempt to reconnect after five minutes. If that fails, it will make a new attempt every 15 minutes for the next 24 hours. Any manual network reconfiguration of the thermostat will stop automatic reconnection attempts.
-
Page 16: App Setup
Use your smart device to scan the QR code located within this quick start guide or on the packaging to be directed to the Bosch website for easy download. Go to boschheatingandcooling.com, navigate to the Bosch Intuitive Control and click App from the menu to download. - Page 17 Step 2: Create a User Account After installing the App onto your smart phone, create a user account. Step 3: Add Device to your Account Log in to your account: tap “Add Device” on the device list screen, then simply follow on-screen instructions in the App to complete this task.
-
Page 18: Starting Your System
The Temporary Verification Code (TVC) is a 4-digit code randomly generated each time you enter this screen. It expires after 90 seconds, upon which a new one will be needed. Tap the TVC code to The MAC ID is a unique generate a new one if the network ID for this device previous code expires. - Page 19 Please note that your device You can opt to turn is always “running on a the System Off to programmed schedule” and the current operating mode is shut down all HVAC operations including part of that schedule. Thus, fan operation. when you change the System Mode, it will only change the mode for the current...
- Page 20 Temporary Scheduling Temporary Adjustment This feature will override the current set point to the desired set point until the next scheduled time in the program. If you would like to permanently lock in the adjusted temperature, you must press the “lock” icon. It will permanently lock in the adjustment until the “X”...
- Page 21 Programming Schedule Programming a Schedule There are only two default schedules (Home, Vacation) are available for selection when the device is offline. If the Internet connection is established you may have up 99 schedules. Programming with the Thermostat You can access the Schedule by following Menu > Schedule >Select the Schedule that you would like to modify Select a Schedule from the list Select the Mode that you would like the schedule to...
- Page 22 Programming...
- Page 23 Programming with the App From the main menu in the App, select Schedule Select the Mode that you would like the schedule to operate on and press Edit • If you would like to edit a different schedule please press “List” for list of available schedules Select the day of the week to change...
-
Page 24: Additional Features
Additional Features Weather Forecast You must grant “location The weather forecast is access” for the app to based on the location of the enable this feature. installed thermostat. The location will be assigned to you the first time you connect your thermostat to the app. Screen Options: There are 3 levels of screen brightness and 3 options for “Screen Timeout.”... - Page 25 System Modes Unit Operating Mode Heat: Unit will be cycled to maintain scheduled heating set-point. Cool Only: Unit will be cycled to maintain scheduled cooling set-point. Auto: Unit will be automatically switched between heating and cooling operations to maintain heat/cool set-points. Off: All heating and cooling functions are turned off.
- Page 26 Humidifier/Dehumidifier Operating Mode User may select either humidifier/dehumidifier as an optional accessory if the wire was properly installed during the initial installation process. You may only operate in either humidifier OR dehumidifier mode and may not operate in both mode at the same time.
-
Page 27: Advanced Features
Advanced Features Advanced Settings is designed for professionals who want to utilize advanced features for better accessibility. It will also allow the user to factory reset the device and requires an access code. AB: Auto-mode Switch Band* Set difference for auto switch between heating/cooling PM: Parameter Modifier* Advanced settings for system key parameters SC: Sensor Calibration*... -
Page 28: Warranty
If Bosch determines that the product has a defect in workmanship or materials, Bosch, at its option, will repair or replace the defective part. - Page 29 SOLE OBLIGATION WITH RESPECT TO THE PRODUCT AND PURCHASER’S EXCLUSIVE REMEDIES ARE SET FORTH IN THE FOREGOING LIMITED WARRANTY. BOSCH SHALL NOT BE LIABLE FOR ANY INDIRECT, PUNITIVE, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES INCLUDING, WITHOUT LIMITATION, INJURY OR DAMAGE TO PERSONS OR PROPERTY OR DAMAGES FOR LOSS OF USE, LOST PROFITS, INCONVENIENCE OR LOSS OF TIME.
- Page 30 Bosch Thermotechnology Corp. Watertown, MA • Londonderry, NH • Ft. Lauderdale, FL • Williston, VT Inquiries and support: 1-800-283-3787 boschheatingandcooling.com 76H993390 6-17 Copyright © 2017 Bosch Thermotechnology Corp. All rights reserved. Subject to change without notice.
- Page 31 Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.