Bosch BCC100 User Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Thermostat
  5. BCC100
  6. User manual

Bosch BCC100 User Manual

Wi-fi thermostat
Hide thumbs Also See for BCC100:

Advertisement

Table of Contents

Bosch Connected Control
BCC100 Wi-Fi Thermostat User Guide
BoschHeatingAndCooling.com
1

Advertisement

Table of Contents
loading

Related Manuals for Bosch BCC100

Summary of Contents for Bosch BCC100

  • Page 1 Bosch Connected Control BCC100 Wi-Fi Thermostat User Guide BoschHeatingAndCooling.com...

  • Page 2: Table Of Contents

    Contractor for support. CHECK COMPATIBILITY FIRST ▶ Heat Only, Cool Only, For conventional (gas/oil/electric) and Combined Heat & Cool For heat-pump systems ▶ Up To 4-Heat & 2-Cool Not compatible with other Bosch Boiler controls, such as the Logamatic...

  • Page 3: Getting Started

    Getting Started The BCC100 thermostat is designed to work on most 24VAC low voltage heating and cooling systems such as gas and oil furnaces, heat pumps, and single or dual-stage systems. Professional installation recommended for: ▶ Humidifiers and dehumidifiers WARNING: Turn Off Power Failure to turn off power may result in electrical shock and/or system damage.
  • Page 4 RC (R) Humidifier/Dehumidifier Cooling Appliance Power Note: The color of your wires may not be the same as shown in this User Guide (1)Emergency heat activated at W1, (2)Auxiliary heat activated at W2, (3)Only to be used with Bosch WSHP)
  • Page 5 NOTE: The following wiring diagrams describe some common configurations that are compatible with the BCC100. Not all compatible configurations are depicted below. If you are unsure of how to connect your thermostat, please contact customer support using the number on the card provided in the box.
  • Page 6 Single Stage Cool – Air Conditioner ---- Data Ensure the system has a C-wire Ensure the pre-installed jumper wire remains between RH and RC Connect the R, C, Y1 and G wires from the Air Conditioner to RC, C, Y and G terminals on the wall Jumper H/DH plate, respectively...

  • Page 7: Heat Pump Systems

    Heat Pump Systems Heat pump systems are specialty designed to be able to provide heating and cooling using a single compressor, a reversing valve, and a fan Single Stage Heat Pump ---- Data Ensure the system has a C-wire Ensure the pre-installed jumper wire remains between RH and RC Connect the R, C, Y1, O/B and G wires from the heat pump to RC,...
  • Page 8 Humidifier and Dehumidifier Accessory A single Humidifier or Dehumidifier Accessory can be controlled using the BCC100. The thermostat only supports Humidifiers in heating operation, Dehumidifiers in cooling operation, and only one accessory per thermostat. Humidifier or Dehumidifier Accessory with a Combined Single...
  • Page 9 Switch on the power to the heating/cooling system at the main switch box. If the thermostat does not power on, remove the BCC100 from the wall and ensure the RH/RC wire(s) and C-wire are correctly connected to both the appliance and the thermostat.

  • Page 10: Main Screen

    If you are having trouble powering the thermostat, please refer to the Customer Support Card in the box for additional support information. Thank you for choosing the BCC100. Enjoy the savings and comfort of owning a Bosch connected thermostat! Main Screen...

  • Page 11: Icons

    Icons Basic Icons Heating Types Menu Gas/Oil/ Propane Exit / Save Settings Heat Pump Back Electric Weather Fan Modes Schedule Device Settings Auto System Settings Advanced Settings Circulation System Modes Humidity Humidifier Heat Mode Dehumidifier Cool Mode Auto Mode Emergency Heat Mode...
  • Page 12 Icons Unit Operation Heat Mode Heating on (1st stage) & (2nd stage) Cool Mode Cooling on (1st stage) & (2nd stage) Auto Mode Heating on (1st stage) & (2nd stage) Auto Mode Cooling on (1st stage) & (2nd stage) Fan on/running - Fan Auto Mode Emergency heat on Emergency Heating...

  • Page 13: Initialization

    Enabling this feature will allow the thermostat to control an external dehumidifier accessory, while disabling this feature will allow the thermostat to control specific appliances, such as Bosch Water Source Heat Pumps equipped with Hot Gas Reheat coils and/or ECM motors, with just an H/DH call.
  • Page 14 3. Wi-Fi Setup The BCC100 requires a reliable Wi-Fi connetion in order to access smart features such as remote access, weather forecast and more. To complete the Wi-Fi setup, follow the on-screen instructions.
  • Page 15 4. Schedule During offline operations, only 2 schedules (Home and Vacation) are available. However, when a Wi-Fi connection is established, the list can be expanded up to 4 schedules. HOME: You can use this schedule to set your heating/ cooling equipment to predefined set points. The device initially comes with a factory default schedule, which can be adjusted as necessary.
  • Page 16 5. Review In the final step, the BCC100 provides a review of all information that you have entered into the thermostat. You will be able to go back to different parts of the Initial Setup guide by pressing the different sections on the left pane.

  • Page 17: Wi-Fi Setup

    Wi-Fi Setup Wi-Fi Connection SCAN: To start Wi-Fi setup, tap the Wi-Fi icon in the top right hand corner of the main screen. Then click the Scan icon to view available Wi-Fi networks. Follow the on-screen instructions to complete the Wi-Fi setup. Hidden Wi-Fi Connection MANUAL ENTRY: If you are trying to connect to a hidden network, press the SSID button to bring up the SSID...
  • Page 18 NOTE: If this is a first time installation, follow the instructions in the App Setup section of this User Guide to register your thermostat to your smart device. The following may cause a failed connection to the device: ▶ Wi-Fi signal is too weak ▶...
  • Page 19 For an unregistered device, click the green Registration button to register your account. If you want to register a different account to your device, you can also click the Registration button and follow the steps outlined in the App Setup section of this User Guide. Auto Reconnect If your device loses connection with your wireless network, it will automatically attempt to reconnect after...

  • Page 20: App Setup

    Android™ devices running 4.0.3 & higher There are three ways to download the BCC100 App for your smart device: ▶ In the App Store or Google Play, search “Bosch Connected Control” or “BCC100” and then download the app. ▶ Use your smart device to scan the QR code below or on the packaging to be directed to the Bosch website for easy download.
  • Page 21 MAC ID by navigating to the Wi-Fi Settings screen on your thermostat and clicking the Registration button. Add Device Device Name BOSCH Device MacID MAC ID and Temporary Verification Code 1234 Temporary Verification Code You can find the MAC ID and...

  • Page 22: Starting Your System

    TVC to device over the generate a new code. internet. When dealing with Bosch Customer To automatically populate Support, the TVC the MAC ID and TVC in functions as verification your App, you may use the...
  • Page 23 Note that your device is always running on a programmed schedule and the current operating mode is part of that schedule. Thus, when you change the Mode, it will only change the mode for the current program. If you change to a different program, your Mode will follow the new program that you have selected.

  • Page 24: Temporary Scheduling

    Temporary Scheduling Temporary Adjustment This feature will override the current set point in favor of the set point you enter until the next programmed time in the schedule. If you would like to permanently schedule the new set point, press the lock icon. This will permanently lock in the adjustment until the X button is pressed on the main screen.

  • Page 25: Programming Schedules

    Programming Schedules Programming a Schedule When the thermostat is offline, there are only two default schedules (Home and Vacation) available for selection. If the Internet connection is established, you may have up to 4 schedules. Programming with the Thermostat You can access the Schedule by following: Menu >...
  • Page 26 Programming with the App From the main menu in the App, select Schedule. Schedule Select the Mode that you Mon Tue Wed Thu Sat Sun would like the schedule Home to operate, and press Edit Periods: 4 55°-60° List Copy If you would like to edit 00:30am-03:15am 72°-78°...

  • Page 27: Additional Features

    Additional Features Weather Forecast The weather forecast is NOTE: You must grant based on the location of “location access” for the installed thermostat. the app to enable The first time you connect this feature. your thermostat to the app, your location was assigned to the thermostat. Screen Options There are 3 levels of screen brightness and 3 options for Screen Timeout.
  • Page 28 Unit Operating Mode Heat: The thermostat cycles your heating appliance to maintain your scheduled heating set point. Cool: The thermostat cycles your cooling appliance to maintain your scheduled cooling set point. Auto: The thermostat cycles your heating/cooling appliance to maintain your scheduled heating/cooling set points. Off: The thermostat turns off all heating/cooling functions.
  • Page 29 Humidifier & Dehumidifier NOTE: You may only Operating Mode operate in either You can enable automatic humidifier OR humidity control if the correct dehumidifier mode and humidifier or dehumidifier may not operate in both accessory was correctly wired modes at the same time. and configured during the thermostat’s initial setup.
  • Page 30 Temperature, Alerts, and Auto-On NOTE: Alerts are an Alert: Send an alert message additional source of or turn on the system protection for your automatically when the room heating/cooling temperature is out of the appliance. range between set-points. Run Time The thermostat keeps track of your run time for the Heating, Cooling, Air Filter and Water Pad.

  • Page 31: Advanced Features

    Advanced Features Advanced Settings are designed for HVAC professionals who want to modify advanced features for better unit control. They also allow you to reset the device to factory settings. NOTE: Advanced Settings are for professional use only and requires access code: 1886. IP: IP Address Ability to manually type in IP address RS: Factory Reset...
  • Page 32 ▶ Alexa, what is the temperature of the (Device Name)? The Device Name is the name assigned to your device in the BCC100 app. You can check the device name by opening the BCC100 app and reading the name displayed on the main menu of selectable devices.
  • Page 33 Connecting Your BCC100 to Amazon Alexa 1. Download the BCC100 App, create an account, and register your app to the BCC100 thermostat. NOTE: You must have a registered BCC100 account to set up and use your thermostat with Amazon Alexa.

  • Page 34: Warranty

    If Bosch determines that the Product has a defect in workmanship or materials, Bosch, at its option, will repair or replace the defective part.
  • Page 35 The alleged defective Product must be returned to Bosch in accordance with Bosch procedure then in force for handling goods...
  • Page 36 Heating Cooling Hot Water Controls www.BoschHeatingAndCooling.com Bosch Thermotechnology Corp. Watertown, MA • Londonderry, NH • Ft. Lauderdale, FL Inquiries and support: 1-800-283-3787 Copyright © 2018 Bosch Thermotechnology Corp. All rights reserved. Subject to change without notice. 76H993390C 4-18...

Table of Contents