Table of Contents
Advertisement
System and Point Annunciation
E.6 System and Point Annunciation
The control panel's annunciation points are divided into 13 ACS Selection Groups of 64 points. Table E.1, which follows, summarizes the
ACS Selection Groups and what an annunciator displays if a group is selected. This fire alarm control panel's Programming Manual provides
a complete listing of the points within the ACS Selection Groups and instructions on programming the panel for addressable annunciators.
ACS Selection Group
A
B
C
D
E
G
H
K
M
1
Defining Programmable Annunciator Groups requires VeriFire® Tools
NOTE: Annunciators configured for point annunciation:
• Do not respond to any status change, including system alarm or system trouble, that is not within its ACS Selection Group.
• Do mask status changes for point number 1 of the start address selection.
• Do not respond to System Reset, Acknowledge, or Alarm Silence.
• Do not use the battery saving feature (100 mA battery load).
ACS Manual — P/N 15842:N3 5/4/2022
8 Systems points + Zones 1-56
Zones 57-99, 8 F zones, 4 NAC
Loop 1, Modules 1-64
Loop 2, Modules 1-64
Loop 1, Modules 65-128
F
Loop 2, Modules 65-128
Loop 1 - Modules 129-159, 2 unused points, Loop 2 - Modules 129-159, 2 unused points
Loop 1, Detectors 1-64
I
Loop 2, Detectors 1-64
J
Loop 1, Detectors 65-128
Loop 2, Detectors 65-128
L
Loop 1 - Detectors 129-159, 2 unused points, Loop 2 - Detectors 129-159, 2 unused points
Panel circuits 1-1 to 8-8 (64)
1
Programmable Annunciator Group #1
2
Programmable Annunciator Group #2
3
Programmable Annunciator Group #3
4
Programmable Annunciator Group #4
5
Programmable Annunciator Group #5
6
Programmable Annunciator Group #6
7
Programmable Annunciator Group #7
8
Programmable Annunciator Group #8
9
Programmable Annunciator Group #9
0
Programmable Annunciator Group #10
Table E.1 ACS Selection Groups and the Annunciator Display
NFS2-640, NFS-320 (UL 9th) and NFS-640 Systems (UL 8th)
Annunciator Display
1
1
1
1
1
1
1
1
1
1
43
Advertisement
Table of Contents
