Intended Use; General Power Tool Safety Warnings - AEG ACS58B18 Original Instructions Manual

TECHNICAL DATA
Rated voltage
Max bar length
Chain oil tank capacity
Weight (without battery pack, with guide bar, chain and empty tank)
Usable cutting length
Max no-load speed
Vibration level (in accordance with EN 60745-1 & EN 60745-2-13)
Front handle
Rear handle
Uncertainty of measurement
Noise emission level (in accordance with EN 60745-1 & EN 60745-2-13)
A-Weighted sound pressure level at operator's position
Uncertainty of measurement
A-Weighted sound power level
Uncertainty of measurement
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration, such as: maintain the tool and the accessories, keeping
the hands warm, and organizing work patterns.
BATTERY AND CHARGER
Model
Battery pack
Charger
Compatible battery packs
REPLACEMENT PARTS
Bar Part number
Part number
Length
Chain Pitch
Gauge
Drive links

INTENDED USE

The product is intended for use outdoor use only. For safety reasons,
the product must be adequately controlled by using a two-handed
operation at all times.
CORDLESS CHAINSAW
ACS58B18 A58CHS18B4
- A58BAT14
- ABC58S
ABP58LI-401, A58BAT14
PCB1862050 (POWERFIT)
PWFTCA1802 (POWERFIT)
18 in. ( 45.7 cm)
0.375 in. (0. 9 53 cm)
0.05 in. (0. 1 27 cm)
62
25
The product is designed for cutting branches, trunks, logs, and beams
of a diameter determined by the cutting length of the guide bar. It is
designed to cut wood only.
The product is to be used only in domestic applications by adults who
have received adequate training on the hazards and preventative
measures to be taken while using the product. It is not to be used
by children or by persons not wearing adequate personal protective
equipment and clothing. It is also not to be used for professional tree
services.
Do not use the product for any other purpose.
. WARNING! When using the product, the safety rules must be
followed. For your safety and that of bystanders, read and fully
understand these instructions before operating the product.
You should attend a professionally organised safety course
in the use, preventative actions, first-aid, and maintenance of
chainsaws. Keep these instructions safe for later use.
WARNING! Chainsaws are potentially dangerous tools.
Accidents involving the use of chainsaws often result in loss of
limbs or death. Falling branches, toppling trees, and rolling logs
can kill. Diseased or rotting timber poses additional hazards.
Assess your capability of completing the task safely. If there is
any doubt, leave it to a professional tree surgeon.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
ACS58B18/ A58CHS18B4
58 V
450 mm
177 ml
5.08 kg
385 mm
21 m/s
2. 9 m/s 2
3.7 m/s 2
1.5 m/s
2
90.8 dB (A)
2.5 dB
101.8 dB (A)
2.5 dB
25