Select File - Panasonic LP-RF Series Setup & Maintenance Manual

4-6-11 Select file

SELECT 0 - 2 IN
(No.19-21)
D0 - D15 IN (No.3-18)
SET IN (No.2)
TRIGGER IN (X5)
SET OK OUT (No.28)
READY OUT (Y5)
PROCESSING OUT (Y10)
Item Time
T1 0.5ms or more
T2 0ms or more
T3 2 to 510ms
T4 ―
T5 2ms or more
T6 0ms or more
*1 : Turn off SELECT 0 IN to SELECT 2 IN when you specify a file number.
*2 : You can input the next file number during the trigger processing. If the trigger processing was being executed when
you turned on SET IN (No.2), the file number changes after the trigger processing completes.
118
ON
*1
OFF
ON
File
number A
OFF
ON
T1
OFF
T2
ON
OFF
ON
T3
OFF
ON
OFF
ON
OFF
Remarks
After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN and D0 IN to
D15 IN, turn on SET IN (No.2).
Keep the input until SET OK OUT (No.28) turns on.
One-shot output. Set the output time on the system settings screen. There is a small
margin of error for the setting value.
• In the laser pumping completed and shutter opened state: Time for marking data
creation. It varies depending on the quantity of the setting data.
• When the laser pumping is not completed and shutter is closed: Total time for shutter
opening and marking data creation, or time for laser pumping, whichever is longer.
Keep the ON status for 2ms or more.
To input the next file number right after TRIGGER IN (X5), input SET IN (No.2) after
PROCESSING OUT (Y10) turns ON.
File number A
T4
ready
ME-LPRF-SM-11
File
number B
T6
T1
*2
T2
T5
T3
T4
File
number A
File number B
ready