Black & Decker BCD900 Manual page 10

ENGLISH
Charger
Input Voltage
V
AC
Output Voltage V
DC
Current A
Approx. Charge time hour
Declared dual-number noise emission values in accordance with ISO 4871
Measured A-weighted sound power level, L
Uncertainty, K
Measured A-weighted sound power level at the work station, L
in decibels =92 dB(A)
Values determined according to noise test code given in
EN62841-1:2015+AC:2015+A11:2022,
using the basic standards EN62841-2-6:2020+A11:2020
NOTE - The sum of a measured noise emission value and its associated uncertainty represents
an upper boundary of the range of values which is likely to occur in measurements
Vibration total values (triax vector sum) determined according to EN 62841
the work mode description
'hammer drilling into concrete'
Vibration emission Value a
h
Uncertainty K
Values determined according to EN62841-1:2015+AC:2015+A11:2022
and EN62841-2-6:2020+A11:2020
Declaration of Conformity
Supply of Machinery (Safety) Regulations 2008
BCD900 Rotary hammer
Black & Decker declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1592 (as amended),
BS EN62841-1:2015+AC:2015+A11:2022,
BS EN62841-2-6:2020+A11:2020.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
10
(Original instructions)
220 - 240 230
8 - 20 18
1.0 2.0
2 - 4 h 1 - 2 h
(ref. 1pW), in decibels = 100 dB(A)
WA
, in decibels = 3 dB(A)
WA
(ref. 20μPA),
PA
Uncertainty, K , in decibels = 3 dB(A)
PA
the work mode
description 'chiselling'
14.8 m/s 18.4 m/s
2
1.5 m/s 1.5 m/s
2
The undersigned is responsible for compilation of the techni
cal file and makes this declaration on behalf of Black & Decker
EC declaration of conformity
Black & Decker declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015+A11:2022,
EN62841-2-6:2020+A11:2020.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Black
2
& Decker at the following address or refer to the back of
2
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker .
Guarantee
Black & Decker is confident of the quality of its products and
offers consumers a 24 month guarantee from the date of
purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area and the United Kingdom.
To claim on the guarantee, the claim must be in accordance
with Black & Decker Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised
repair agent.
Terms and conditions of the Black & Decker 2 year guarantee
and the location of your nearest authorised repair agent can
be obtained on the Internet at www.2helpU.com, or by
contacting your local Black & Decker office at the address
indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new Black & Decker product and receive updates on new
products and special offers.
Director - Consumer Power Tools
Black and Decker Slough England SL1 4DX
MACHINERY DIRECTIVE
%
BCD900 Rotary hammer
the manual.
Patrick Diepenbach
General Manager, Benelux
Black and Decker, 2800 Mechelen,
Ed Higgins
United Kingdom
30/12/2022
Belgium
30/12/2022