Intended use 3. Personal safety Your BLACK+DECKER BCD001 - Drill, has been designed for a. Stay alert, watch what you are doing and use common screwdriving applications and for drilling in wood, metal and sense when operating a power tool. Do not use a plastics.
ENGLISH (Original instructions) 4. Power tool use and care 6. Service a. Do not force the power tool. Use the correct power a. Have your power tool serviced by a qualified repair tool for your application. The correct power tool will do person using only identical replacement parts.
Page 5
(Original instructions) ENGLISH Injuries caused when changing any parts, blades or ac- Do not attempt to charge damaged batteries. cessories. Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks. Chargers Impairment of hearing.
ENGLISH (Original instructions) Important charging notes Recommended charging temperature: approx. 24 °C. Note: The charger will not charge a battery if the cell Longest life and best performance can be obtained if temperature is below approximately 10 °C or above 40 °C. the battery pack is charged when the air temperature is The battery should be left in the charger and the charger between 18 °...
(Original instructions) ENGLISH Operating Instructions To switch the tool off, release the switch. Hints for optimum use Torque control (fig.D) This tool is fitted with a torque adjustment collar (3) to select Drilling the operating mode and to set the torque for tightening Use sharp drill bits only.
Products and batteries contain materials that can be recov- ered or recycled, reducing demand for raw materials. Please recycle electrical products and batteries accord- ing to local provisions. Further information is available at BCD001 - Drill, Screwdriver www.2helpU.com...
Page 9
(Original instructions) ENGLISH Black & Decker declares that these products described under "technical data" are in compliance with: 2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010, EN60745-2-2:2010. These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information, please contact Black & Decker at the following address or refer to the back of the manual.