Table of Contents
Advertisement
Battery Capacity
System Setup
Location Number
Patient Questions
Revision E
Troubleshooting: Frequently Asked Questions
Dry the surfaces with a clean cloth or paper towel.
Q: What is the capacity of the battery?
A: We recommend that the MAC 5500 be plugged into a wall outlet whenever it is
not in use. However, the life of the battery is approximately 100 ECGs and one-
page reports or six hours of continuous operation (without printing).
Q: When entering in the patient data, how do I get the Location field to
automatically populate with the same number?
A: The Location number can be set in System Setup to save you from entering it for
each test.
Go to System Setup.
Select Basic System.
Select Miscellaneous Setup.
Arrow down to Location and type in the number you want set as your
default. Then press Enter.
Press the esc key until you return to System Setup.
Select Save Setup.
Select To System.
You can select Main Menu to exit System Setup.
Q: How do I change what questions I see when I am entering the patient data?
A: The patient questions you see on the Patient Data window when starting a test
were set up in System Setup.
Go to System Setup.
Select Basic System.
Select Patient Questions.
Select the patient questions you want to include when entering the patient
data for a test.
Press the esc key until you return to System Setup.
Select Save Setup.
Select To System.
You can select Main Menu to exit System Setup.
MAC 5500 resting ECG analysis system
2020299-020
4-21
Advertisement
Table of Contents
