NETGEAR Arlo Q Plus Quick Start Manual page 5

Connect With Ethernet
1. Connect the PoE adapter to the back of your camera.
2. Connect your own Ethernet cable to the PoE adapter.
3. Connect the other end of the Ethernet cable to an Ethernet
switch or a router.
4. Connect the included micro USB cable to the side of the PoE
adapter.
5. Connect the other end of the micro USB cable to the USB
power adapter.
6. Plug the USB adapter into a wall socket.
7. Go to Get the App on page 10 to continue installing your
camera.
8
1
4
6
5
2 3
9