Makita PF400MP Original Instruction Manual page 8

Preparation
1. Always wear substantial footwear and long
trousers while operating the machine.
Do not wear loose clothing or jewellery that
2.
can be drawn into the water inlet. Keep long
hair away from the water inlets.
Always wear protective goggles to protect
3.
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
4. To prevent dust irritation the wearing of a face
mask is recommended.
While operating the machine, always wear
5.
non-slip and protective footwear. Non-skid,
closed-toed safety boots and shoes will reduce the
risk of injury.
6. Wear ear protection, such as ear muffs.
Exposure to noise can cause hearing loss.
Wear protective gloves.
7.
Operation
1. Before the operation, make sure that there are
no sharp objects in the work area that could
damage the hose.
2. Do not pour or splash water toward bystand-
ers, animals, power unit, or energized parts.
3. Do not use the pump for potable water.
4. Do not pump corrosive chemicals or flamma-
ble liquids.
Clear the area of children, bystanders, and
5.
pets. At a minimum, keep all children, bystand-
ers, and pets outside a 5 m radius.
Switch off the machine and remove the battery
6.
cartridge, and make sure that all moving parts
have come to a complete stop
whenever you leave the machine.
•
• before clearing blockages.
• before checking, cleaning or working on
the machine.
if the machine starts to vibrate
•
abnormally.
7. Operate the machine only in daylight or in
good artificial light.
8. Do not overreach and keep proper balance and
footing at all times.
9. Always be sure of your footing on slopes.
10. Operate the machine in a recommended posi-
tion and on a firm surface.
11. Do not operate the machine at high places.
12. If the machine strikes any foreign objects or
should start making any unusual noise or
vibration, immediately switch off the machine
to stop it. Remove the battery cartridge, and
inspect the machine for damage before restart-
ing and operating the machine. If the machine
is damaged, ask Makita Authorized Service
Centers for repair.
13. Prevent unintentional starting. Ensure the
switch is in the off-position before inserting
battery cartridge, picking up or carrying the
machine. Carrying the machine with your fin-
ger on the switch or energizing the machine
that has the switch on invites accidents.
14. Before assembling or adjusting the machine, switch
off the machine and remove the battery cartridge.
15. Wear the personal protective equipments
before starting the machine.
16. Before starting the machine, inspect the
machine for damages, loose screws/nuts or
improper assembly. Check all switches for
easy action. Clean and dry the handles.
17. Never attempt to start the machine if the
machine or hose is damaged or not fully
assembled.
18. Adjust the shoulder harness and hand grip to
suit the operator's body size.
19. During operation, use the shoulder harness.
Keep the machine on your right side firmly.
► Fig.2
20. Hold the front handle with the left hand and the
rear grip with the right hand, no matter you are
right-hander or left-hander. Wrap your fingers
and thumbs around the handles.
21. Never attempt to operate the machine with one
hand. Loss of control may result in an injury.
22. Follow the instruction manual of the power
unit for proper use.
23. Refer to the instruction manual of the power
unit for how to start and control the machine.
24. During operation always hold the tool with
both hands. Never hold the tool with one hand
during use.
25. Do not operate the tool in bad weather or if
there is a risk of lightning.
26. Before operation, make sure that the shoulder
harness is properly attached to the tool.
27. Do not submerge the machine in water or
place the machine on a wet surface.
28. Do not leave the tool unattended outdoors in
the rain.
29. During operation or while moving your oper-
ating position, be careful not to trip over the
hoses or pipes at your feet.
30. When you use the machine on muddy ground,
wet slope, or slippery place, pay attention to
your footing.
8 ENGLISH