Cisco MCS 7800 Series Administration Manual page 60

Viewing and Editing Active Meetings
Table 5-8
Field
VIP Source
<Meeting Attendees>
To register new or modified settings, click Save.
•
To exit and return to the Active Meetings list, click Close.
•
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
5-58
Active Meetings Settings
Description
Defines how the VIP is displayed to all endpoints. Options are:
Room: If selected, all segments for the CTS endpoint identified as
"VIP" are displayed.
Center Segment: If selected (and the CTS endpoint identified as
"VIP" is a CTS-3000), then only the center segment is displayed.
Click the appropriate radio button to select.
Defines roles for participates if VIP mode is selected. Options are:
VIP: This attendee is broadcast to all other meeting attendees for
the entire meeting. The VIP's endpoint continues to switch between
endpoints with active speakers. Only one VIP can be defined per
meeting.
Viewer: The VIP is broadcast to this attendee.
NA: The attendee is neither a viewer or a VIP. The NA's endpoint
continues to switch between end points with active speakers.
Click the appropriate radio button to select.
Chapter 5 Managing Meetings
OL-12586-02