Cisco 12416 Installation And Configuration Manual page 340

Removing and Replacing the Standard AC-Input Power Shelf
Step 5
Step 6
Caution
Figure 7-28 Connecting the AC-Input Power Shelf
Hole
Guide pin
(one on each
side of chassis)
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
7-48
Insert the new power shelf halfway into the chassis.
Connect the power shelf to the chassis power interface panel connectors
(Figure 7-28):
Be sure the holes on each side of the power shelf are aligned with the guide
a.
pins on each side of the chassis.
b. Carefully slide the power shelf into place until its two connectors just mate
with the power interface panel connectors.
To prevent damage to the interface connectors, do not use excessive force when
inserting the power shelf into the chassis.
Elcon connectors
on power shelf
back panel
Chapter 7 Maintaining the Router
OL-11495-01