Starting Diagnostics - Mitsubishi Electric MELSEC L Series User Manual

9.2
This section describes how to execute the CC-Link IE Field Network diagnostics.
1.
2.
● When another station has been specified as a connected station
● Start from the "PLC Diagnostics" window
76
Downloaded from ManualsNet.com

Starting Diagnostics

Connect GX Works2 to the head module.
Start the CC-Link IE Field Network diagnostics from the menu.
[Diagnostics] [CC IE Field Diagnostics]
The CC-Link IE Field Network diagnostics cannot be started when another station has been specified in "Other Station
Setting" of the "Transfer Setup" window. In this case, directly connect GX Works2 to the head module.
The CC-Link IE Field Network diagnostics can also be started from the "PLC Diagnostics" window.
1. With the mouse, select the connector to which the Ethernet cable is connected.
2. Click "CC-Link IE Field Diagnostics" appearing on the right side.
search engine