7.4
Set intelligent function module parameters.
Set parameters in the "New Module" window.
Module Type
Module
Selection
Module Name
Mounted Slot No.
Mount Position
Specify start XY address
Title Setting
Title
After these parameters are set, a folder is created under the "Intelligent Function Module" folder in the Project window.
X, Y, and W can be set as an auto refresh device.
64
Downloaded from
ManualsNet.com
Intelligent Function Module Parameters
Project window
Right-click [Intelligent Function Module]
Item
Select a module type.
Select a model name.
Select the number of the slot where an intelligent function module
is connected.
Click this button to check I/O assignment setting of PLC
button
parameter.
Enter the start I/O number.
Enter a title displayed in the Project window.
search engine
Description
[New Module]
Setting range
Manual for the intelligent
function module used