Install Chassis - Cisco 1800 Series Quick Start Manual

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/qsg/index.htm
Items Included with Cisco 1841 Routers
Your router package should include the following items in addition to the router:
• One blue RJ-45-to-DB-9 console cable; one DB-9-to-DB-25 modem adapter
• Power cord
• Cisco.com card; Cisco product registration card
• Regulatory Compliance and Safety Information for Cisco 1840 Routers document
• Cisco Router and Security Device Manager (SDM) Quick Start Guide document
• Cisco 1800 Series Integrated Services Routers (Modular) Quick Start Guide (this document)
Items Not Included
Individual items in this list may be required for your installation:
• PC with Hyperterminal or similar terminal emulation program, or a modem for remote administrative access
• Cables for WAN interfaces, LAN interfaces, or USB interface
• Cable ties, number 2 Phillips screwdriver
• Other typical equipment, such as channel service unit/data service unit (CSU/DSU); NT1 device for ISDN-BRI S/T; Ethernet
hub; USB devices
Note The onboard USB ports (version 1.1) support only USB devices approved and qualified by Cisco.
Note The USB port (version 1.1) is intended for future use only.
4

Install Chassis

This section contains basic installation procedures. For more detailed installation instructions, refer to the Cisco 1800 series
hardware installation documentation at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/hw/index.htm
Safety Information
The Regulatory Compliance and Safety Information for Cisco 1840 Routers document contains translations of the warnings
that appear in this quick start guide.
For safety information you must know before working on your Cisco router, refer to the Regulatory Compliance and Safety
Information for Cisco 1840 Routers document that accompanied this device.
4