Fcc Part 68 Notice - Cisco LightStream 1010 Configuration Manual

FCC Part 68 Notice

FCC Part 68 Notice
The port adapter, Model WAI-T1C-4RJ48 used in the ATM/LAN switch complies with Part
68 of the FCC rules. On the bottom of this equipment is a label that contains, among other
information, the FCC registration number. If requested, this information must be provided
to the telephone company.
This equipment cannot be used on telephone company-provided coin services. Connection
to the Party Line Service is subject to State Tariffs.
If this equipment causes harm to the telephone network, the telephone company will notify
you in advance that temporary discontinuance of service may be required. If advance notice
isn't practical, the telephone company will notify the customer as soon as possible. Also,
you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make the necessary modifications
in order to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact us for repair and warranty
information. If the trouble is causing harm to the telephone network, the telephone
company may request you remove the equipment from the network until the problem is
resolved.
It is recommended that the customer install an AC surge arrestor in the AC outlet to which
this device is connected. This is to avoid damaging the equipment caused by local lightning
strikes and other electrical surges.
8-2 LightStream 1010 ATM Switch PAM Installation Guide