Charging - Philips VisaCare SC6240 Manual

Home microdermabrasion, skin resurfacing treatment
Hide thumbs Also See for VisaCare SC6240:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
General advice
-
After each treatment it is advised to use a sun protection factor (SPF)
of 30 or above on the treated areas for a minimum of 3 days.
-
If you have a significant skin condition (including but not limited to
melanoma, basal cell carcinoma, actinic keratosis, melasma, systemic
lupus erythematosus, porphyria, coagulation abnormality and collagen
abnormalities such as keloid wounds, excessive scar formation or a
history of bad wound healing), consult your doctor before you start
using the appliance.
-
If you plan to enjoy the sun (e.g. summer holidays) we recommend that
you interrupt the treatment one week before the holidays and as long
as you are extensively exposed to the sun.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.

Charging

Charging the appliance
Charging the appliance takes approximately 8 hours. A fully charged
appliance has a cordless operating time of up to 30 minutes.
1
Make sure the appliance is switched off.
2
Insert the small plug in the socket of the charging stand and insert
the adapter in the wall socket.
3
Put the appliance in the charging stand.
, The charging light flashes white to indicate that the appliance is
charging.
ENGLISH
9

Advertisement

Table of Contents
loading

Table of Contents