Cleaning And Maintenance; Storage - Philips VisaCare SC6240 Manual

Home microdermabrasion, skin resurfacing treatment
Hide thumbs Also See for VisaCare SC6240:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH
12

Cleaning and maintenance

Do not immerse the appliance in water. Do not use chemicals to clean
the appliance. Never use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
1
Make sure the appliance is switched off before you start cleaning it.
2
Remove the treatment tip from the appliance.
3
Clean the treatment tip under the tap with hot water and some
washing-up liquid. If the exfoliation ring is dirty, let the tip soak in hot
water with washing-up liquid for 5-10 minutes. You can use the brush
to clean it. Make sure you clean the filter with the treatment tip
upside down to rinse off any dirt left in the filter. Dry the treatment
tip with a lint-free towel or let it air-dry.
4
Clean the handle with a damp cloth.
5
Place the dry treatment tip back onto the appliance.
6
Wipe the charging stand with a damp cloth.
Danger: Always keep the adapter and the charging stand dry. Never rinse
them under the tap or immerse them in water.
Clean the treatment tip after every use for hygienic reasons and to prevent
clogging of the filter. Only use washing-up liquid or an alcohol solution
(max. 70%) to clean the treatment tip.

Storage

Store the appliance with the treatment tip attached in the charging stand
or pouch.
Note: Do not store a wet treatment tip on the appliance or in the pouch.

Advertisement

Table of Contents
loading

Table of Contents