Learning More About Your Lumea Series 9900; Charging - Philips Lumea 9900 Series Manual

A
B C D
E

Learning more about your Lumea Series 9900

Charging

Charging the device
5 Clean the light exit window of the device (A).
6 Clean all surfaces of the attachment, including the metal reflector and
window of the attachment (parts B, C, D, E).
7 Let all parts dry thoroughly.
8 Store in a dust-free place at room temperature.
Fully charge the batteries before you use the device for the first time and when
they are empty. Charging the batteries takes up to 1 hour and 40 minutes.
Charge the device when the charging light lights up orange during use to
indicate that the battery is low and will run out soon.
Fully charged batteries provide at least 130 flashes at light intensity 5.
1 Turn off the device.
2 Insert the small plug into the device and the adapter into the power outlet.
-
During charging, the charging light flashes white.
-
When the batteries are fully charged, the charging light lights up white
continuously.
-
Never cover the adapter and device during charging.
Note: The adapter and device can feel warm during charging. This is normal.
Note: This device is equipped with battery-overheat protection and does not
charge if the room temperature exceeds 40 °C.
3 After charging, remove the adapter from the power outlet and pull the small
plug out of the device.
Tip: Charge the device after each use to save battery life.
Note: The battery capacity is not enough for a full body treatment. We advise
you to use the device corded while treating large body areas such as legs.
English
19