Cisco 10BASE-FL Installation And Configuration Manual page 9

Figure 2 Two Port Adapters on a VIP2-15 or VIP2-40 (Horizontal Orientation Shown)
Bus connector
SRAM
DIMM U5
Port adapter
in slot 0
Figure 3 Two Port Adapters on a VIP2-50 (Horizontal Orientation Shown)
Bus connector
SRAM
daughter
card
Port adapter
in slot 0
In the Cisco 7000, Cisco 7507, and Cisco 7513 chassis, the VIP2 is installed vertically. In the
Note
Cisco 7010 and Cisco 7505 chassis, the VIP2 is installed horizontally.
Figure 4 shows a Cisco 7206 with port adapters installed. In the Cisco 7206 and Cisco 7206VXR,
port adapter slot 1 is in the lower left position and port adapter slot 6 is in the upper right position.
The Cisco 7204 and Cisco 7204VXR are not shown, but have four port adapter slots; PA-5EFL can
be installed in any of these four slots.
Port Adapter Locations on the VIP2 and in the Cisco 7200 Series Routers
CPU Boot ROM
U6
U2
U4
Boot ROM
PA-5EFL Ethernet 10BASE-FL Port Adapter Installation and Configuration
DRAM
SIMMs
CPU
Port adapter
in slot 1
DRAM DIMM
Port
adapter
in slot 1
9