Status Indicators; Power Led; Status Led ( ) - NEC Express5800/GT110e EXP280A User Manual
Hide thumbs
Also See for Express5800/GT110e EXP280A:
- Specifications (2 pages) ,
- Configuration manual (29 pages)
Table of Contents
Advertisement
Chapter 1 General Description
4.5
Status Indicators
This section explains the indication and meanings of the server LEDs.
Front view
4.5.1
POWER LED (
POWER LED lights amber during initialization of the system. You can power on the server after the amber
POWER LED goes off.
POWER LED lights green while the server is powered on.
4.5.2
STATUS LED (
While hardware is operating normally, STATUS LED lights green. STATUS LED is off or lights/flashes
amber if there is a problem with hardware.
The following table lists STATUS LED patterns, their explanation and solution.
Optical disk
Access LED
POWER LED
Disk Access LED
STATUS LED
)
)
Tips
Refer to the system event log (SEL) by using NEC ESMPRO or the Offline Tool to
view the cause of failure.
Express5800/GT110e User's Guide
4. Names and Functions of Parts
LINK/ACT LED
SPEED LED
Rear view
37
Advertisement
Table of Contents
