Figure 030-1: Inner Rear Panel Retaining Nuts; Figure 030-2: Convection Heater Element - Miele DGC 6 Series Technical Information

Technical Information
panel. See Figure 030-1.

Figure 030-1: Inner Rear Panel Retaining Nuts

6. Remove the T20 screw (Figure 030-2, Item 1) securing the convection
heater element (Figure 030-2, Item 2).

Figure 030-2: Convection Heater Element

7. Disconnect the convection heater element spade connectors from the
rear of the appliance. See Figure 030-3, Item 1.
8. Remove the two 7mm nuts securing the convection heater element to the
rear of the appliance. See Figure 030-3, Item 2.
30
DGC 6xxx