Honeywell GA-SP01 User Manual page 16

The Sampler
Users Manual
Pushbutton
C
ON/OFF/CALIBRATION
BLOCK AIRFLOW
8
Table 4. Pushbuttons
•
To turn on the sampler, press C.
•
To initiate a calibration, confirm the sampler is on and then press C and hold for 6 seconds.
There will be a beep, the sampler will turn off and upon the next startup the sampler will enter
calibration mode.
•
To turn off the sampler, press C and hold for 2 seconds.
•
To block airflow through the sampler firmly depress the block trigger
Note: Airflow can also be blocked by temporarily kinking the hose or covering the end of the rigid
tube.
www.
Shop for BW products online at:
Description
optimumstores
.com/bw