Honeywell GA-SP01 User Manual page 11

⇒ Warning: Substitution of components may impair Intrinsic Safety.
⇒ This product is not a gas detector.
⇒ Do not use the sampler if it is damaged. Before you use the sampler, inspect the case. Look for cracks or missing
parts.
⇒ If the sampler is damaged or something is missing, contact BW Technologies immediately (see page 2).
⇒ Confirm that the cowl is locked in place before you operate the sampler.
⇒ Use only recommended AA alkaline or NiMH batteries properly charged and installed in the sampler case. (See the
section Replacement Parts and Accessories.)
⇒ Charge NiMH batteries using the recommended charger only. Do not use any other charger. Failure to observe this
precaution could lead to fire or explosion.
⇒ Do not change or charge batteries in a hazardous location. Doing so will impair the intrinsic safety of the unit and
may lead to fire or explosion.
⇒ Read and observe all instructions and precautions in the literature provided with the charger. Failure to do so may
result in fire, electric shock or other forms of personal injury or property damage.
⇒ Do not expose the sampler to electrical shock and/or severe continuous mechanical shock.
⇒ The sampler warranty will be void if the unit is disassembled, adjusted or serviced by non-BW Technologies
personnel.
⇒ Do not immerse the sampler in liquids.
⇒ Confirm that the water trap is empty.
a Cautions
optimumstores
www.
Shop for BW products online at:
Safety Information - Read First
.com/bw
The Sampler
3