Cdr Field Definition - Cisco 30 VIP Troubleshooting Manual

For cisco callmanager release 3.0(1)
Hide thumbs Also See for 30 VIP:
Table of Contents

Advertisement

Cisco IP Telephony Troubleshooting Guide for Cisco CallManager Release 3.0(1)

CDR Field Definition

The following table provides field definitions for CDRs.
Field Definitions
Field
cdrRecordType
globalCallIdentifier
origLegCallIdentifier
dateTimeOrigination
origNodeId
origSpan
callingPartyNumber
origIpPort
origIpAddr
© 2000 Cisco Systems, Inc.
Definition
Type of this record
unsigned integer
Specifies the type of this specific record. It could be a Start
call record(0), End call record(1), or a CMR record(2).
Global Call Identifier
The Global Call Identifier consists of two fields which are both
unsigned integers. The values must be treated as unsigned
integers.
The two fields are
Unsigned integer
Unsigned integer
This is the call identifier that is assigned to the entire call. All
records associated with a standard call will have the same
global call identifier.
Origination leg call identifier
unsigned integer
This is a unique identifier that is used to track the origination
leg of a call. It is unique within a cluster.
Date/time of call origination
unsigned integer
This represents the time that the device originating the call
went off hook, or the time that an outside call was first
recognized by the system (it received the Setup message).
The value is a coordinated universal time (UTC) value, and
represents the number of seconds since Midnight (00:00:00)
Jan. 1, 1970.
Originator's node ID
unsigned integer
This field represents the node within the Cisco CallManager
cluster where the call originator was registered at the time of
this call.
Originator's span or port
unsigned integer
This field contains the originator's port or span number if the
call originated through a gateway. If not, this field contains
zero (0).
Calling party number
up to 25 characters
This is the directory number of the device from which the call
originated.
Calling party's IP port
unsigned integer
This field contains the IP Port of the device from which the
call originated.
Calling party's IP address
unsigned integer
This field contains the IP address of the device from which
the call originated.
GlobalCallID_CallID
GlobalCallID_CallManagerID
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

30

Table of Contents