Specifications; Intended Use - Makita JR103DWAE Instruction Manual

SPECIFICATIONS

Model:
Length of stroke
Strokes per minute
Max. cutting capacities
Rated voltage
Battery cartridge
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Only for EU countries
Ni-MH
Li-ion Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.

Intended use

The tool is intended for sawing wood, plastic and fer-
rous materials.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model JR103D
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model JR105D
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Wear ear protection.
Pipe
Wood
) : 78 dB(A)
pA
) : 78 dB(A)
pA
JR103D
D.C. 10.8 V - 12 V max
BL1015, BL1040B,
BL1016, BL1041B
BL1020B,
BL1021B
376 mm 386 mm
1.3 kg 1.5 kg
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model JR103D
Work mode: cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: cutting wooden beams
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model JR105D
Work mode: cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: cutting wooden beams
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
2 ENGLISH
JR105D
13 mm
-1
0 - 3,300 min
50 mm
50 mm
BL1015,
BL1016,
BL1020B,
BL1021B
376 mm
1.3 kg
2
) : 8.0 m/s
h,B
2
2
) 8.0 m/s
h,WB
2
2
) : 8.0 m/s
h,B
2
2
) 8.0 m/s
h,WB
2
BL1040B,
BL1041B
386 mm
1.5 kg